Primers and Auxiliary Products

DecoGrund is a solvent-free, water-dilutable, ready-to-use deep primer for absorbent substrates.

It is designed to reduce and equalize the absorbency of mineral substrates such as lime, cement, gypsum, as well as gypsum board or old dispersion coatings and similar surfaces.

Packaging: 5 kg canister

DecoPrimer is a solvent-free, quartz-filled multi-purpose primer for weakly absorbent and non-absorbent substrates.

Packaging: 2 kg or 5 kg canister

DecoTec Pore Filler is a solvent-free, ready-to-use primer for highly absorbent mineral substrates such as lime plaster, microcement, or similar materials.

It helps reduce and equalize the absorbency of mineral substrates before applying lacquer or glazes.

Depending on the substrate, it may enhance the surface slightly to moderately.

Packaging: 2 kg or 5 kg canister

DecoLight is a high-quality, polymer-based ready-mix plaster with mineral fillers (lightweight filler).

DecoLight is applied with a maximum layer thickness of 1.5 mm.

Once fully cured, DecoLight is splash-water resistant and mechanically durable.

Used for substrate preparation and fabric embedding.

Packaging: 15 kg bucket

DecoWax is designed for the impregnation and refinement of mineral surfaces such as Calce and DecoTon.

The wax is ready to use and must not be diluted.

It creates a glossy finish and dries nearly invisible. On smooth surfaces, the wax leaves a silky-soft finish.

Perfectly suited for surfaces with Calce fine/medium/coarse.

Slightly enhancing effect

Packaging: 1 kg tin

DecoSoap is a thin, liquid impregnating soap for mineral surfaces such as Calce or concrete optic.

The impregnating soap is ready to use and creates a slightly water- and dirt-repellent surface.

Apply twice (wet on matt-damp).

The impregnating soap does not provide full protection!

Packaging: 2 l canister

DecoOpt is an optimizing additive for water-dilutable, acrylic-based paints, glazes, and dispersion-based silicate paints.

It extends open time, improves flow, and prevents brush and roller marks under sidelight when used correctly.

Suitable for matte paints. Significantly reduces application resistance.

Not suitable for clear coatings, solvent-based, and/or resin/oil-based paints.

Add 10% to the paint; for decorative surfaces up to 20%.

Packaging: 2 l canister